● Humanized design
The core control system of Kesheng is adopted, and the core components are all well-known brands.
The new fluorine-free design and green environmental protection make you always at the forefront of healthy living.
Humanized touch buttons, menu-based operation, intuitive and clear, multiple parameters can be displayed on the same screen.
The mirror stainless steel liner is used, the four corners of the semi-circular arc transition, and the partition or light board in the box can be removed without tools, which is convenient for disinfection and cleaning of the studio.
Large-screen LCD display, multi-group data display on one screen, menu-based operation interface, simple and easy to understand, easy to observe and operate.
30 sets of programs can be set, and each group can set the time range from 1 to 99 hours and 59 minutes (optional).
Optional: with CO2 air inlet (for plant growth) and CO2 controller. (Imported infrared CO2 sensor)
●What are the advantages of LED light source?
No thermal interference: The LED beam does not generate heat and extracts useful light that is beneficial for plant growth.
Energy saving and environmental protection: The energy consumption of LED light source is very low, about 80% lower than that of ordinary light source, so the power consumption is extremely low.
Small size: LED light source has the characteristics of miniaturization, planarity and strong designability.
Stable and long life: Provide accurate and stable illumination, with a service life of more than 50,000 hours and high photoelectric conversion efficiency.
Fast response: Optional overhead plane illumination ensures that the culture can absorb the light source fully and evenly, maintaining the consistency of experimental results.
●Intelligent control technology
It can simulate the temperature changes of nature during the day and night, and can also simulate the multi-directional light source of nature
User-set parameters can be automatically stored in the event of a power outage and the original program can be run after power-up
The circulating wind speed is automatically controlled, which can avoid blowing down the plant seedlings due to the fast circulating wind speed during the experiment
It is equipped with a variety of LED light sources suitable for plant growth, and the spectral structure is consistent with the existing literature data
●Intelligent multi-stage programmable control
The program controls temperature, humidity, illumination and time, simplifies the complex test process, and truly realizes automatic control and operation.
● Safety features
It is equipped with an independent temperature limit alarm system, which will automatically interrupt when the limit temperature is exceeded, so as to ensure the safe operation of the experiment and no accidents.
When a fault occurs, the LCD screen has a fault message, and the operation fault is clear at a glance.
High or low temperature alarm.
●Data control system (optional)
RS485 or USB interface and software, synchronous monitoring of the experimental process or recording of experimental data through the computer.
Realize data recording, data communication, graphic dynamic display, and fault analysis.
Optional printer system for data recording, in line with GMP standards.
|
Preface |
Projects |
Technical parameters |
|
1 |
Product name |
Plant growth chamber with low temperature cold light source |
|
2 |
Product model |
DRX-110A-LEDDRX-110B-LED |
|
3 |
Volume |
110L |
|
4 |
Heating/cooling |
Stainless steel electric heater / fully enclosed fluorine-free compressor |
|
5 |
Temperature control range |
No light -15°C-65°C; With light: -10°C-65°C (minus 10°C can be used continuously for 10000LUX) |
|
6 |
Temperature resolution |
0.1℃ |
|
7 |
Temperature fluctuations |
±0.5°C (Heated) ±1°C (Refrigerated) |
|
8 |
Humidity control range |
50-95%RH Humidity control fluctuation: ±3%RH -7%RH (25-95%RH can be customized) |
|
9 |
Humidification method |
External ultrasonic humidifier |
|
10 |
Illuminance |
Agear:5000LUX Bgear:15000LUX Cgear:25000LUX Dgear:30000LUX E gear: 40000LUX F gear 50000LUX (200000LUX can be customized) |
|
11 |
Lighting method |
Overhead light source, stepless adjustable, enter the required illuminance value |
|
12 |
Working environment |
20±5℃ |
|
13 |
Number of light source board layers |
1 |
|
14 |
Refrigerant |
R404a (Fluorine-free and environmentally friendly) |
|
15 |
working hours |
1-99 hours or continuous |
|
16 |
power |
730W |
|
17 |
Working power supply |
AC220V 50Hz |
|
18 |
Studio size (mm) |
495*505*400 |
|
19 |
Dimensions(mm) |
595*675*1000 |
|
20 |
Heating time |
0 °C to 40 °C ≦ 60 min |
|
21 |
Cool-down time |
40 °C to 10 °C ≦ 100 min |
|
22 |
Compressor delay |
3minute |
|
23 |
Noise |
≦70db |
|
24 |
Cabinet material |
Polyurethane foaming, good thermal insulation effect, small temperature fluctuation, liner 304 stainless steel, appearance 304 stainless steel, corrosion resistance. |
|
25 |
LCD screen |
It can be programmed in multiple stages, and the temperature, light, time, and period of day and night modes can be set independently. |
|
26 |
Temperature control method |
The air duct at the back of the box is used for circulating refrigeration, down in and out, the circulation is uniform, and the air volume is 2m/s. |
|
27 |
Light source material |
Imported wafers, service life 50000h. The LED light source board is waterproof and corrosion-proof, and the material is aluminum substrate, which has good heat dissipation effect |
|
28 |
Air circulation system |
The microcomputer program is automatically controlled, and the air supply system and the exhaust system are composed of an independent air handling system |