◆ Humanized design
The new fluorine-free design keeps you at the forefront of healthy living.
Large LCD display, multi-group data display on one screen, menu operation interface, easy to understand, easy to observe and operate.
Mirror stainless steel liner, four corners of the semi-arc transition, shelf bracket can be freely assembled and disassembled, easy to clean the studio.
◆ Quality assurance
Adopt international brand compressor and circulating fan, unique air duct circulation system, ensure uniform temperature and humidity in the workshop.
PID controller, accurate temperature control fluctuation small, with timing function, the maximum time set value 99 hours 59 minutes.
◆ Automatic control of circulating fan speed
The speed of the circulating fan can be automatically controlled. When the temperature in the box is at a constant temperature, the speed will be reduced to avoid volatilization of the sample due to excessive air volume during the test.
◆ Self-diagnosis function
When the incubator fails, the LCD screen will show fault information, and the operation fault point will be clear at a glance.
◆ LCD multi-stage programmable controller
Multi-stage LCD programmable controller, a variety of parameters on a screen display, menu operation interface, can simplify the complex test process, truly realize automatic control and operation.
◆ Convenient data processing (optional)
It can be connected to printer or 485 communication interface, with USB data transfer interface (U disk), with computer display, can print temperature and time, for the test process data storage and playback to provide a strong guarantee.
◆ Safety function
Independent temperature limit alarm system, beyond the limit temperature will automatically interrupt operation, and sound and light alarm prompt operators, to ensure safe operation of the experiment without accidents. (Optional) High temperature and over temperature will automatically alarm.
◆ UV sterilization system (optional or mold incubator has this function)
The ultraviolet germicidal lamp is located at the top of the box, which can disinfect the inside of the box regularly, effectively kill floating bacteria in the circulating air in the box, and effectively prevent pollution during cell culture.
|
Preface |
projects |
Technical parameters |
|
1 |
product name |
Cryogenic mold incubator |
|
2 |
product model |
MJX–800DC |
|
3 |
volume |
800L |
|
4 |
heating/cooling |
Stainless steel electric heater/fully enclosed fluorine-free compressor |
|
5 |
temperature control range |
–15℃-65℃ |
|
6 |
temperature resolution |
0.1 °C |
|
7 |
temperature fluctuation |
± 0.5 ℃ (heating operation) ± 1 ℃ (cooling operation) |
|
8 |
humidity control range |
50 – 95%RH Humidity fluctuation: ± 3%RH-7%RH (customizable 25 – 95%RH) |
|
9 |
Humidification mode |
External ultrasonic humidifier |
|
10 |
working environment |
20±5℃ |
|
11 |
Number of layers of grid |
4 |
|
12 |
refrigerant |
R404a (fluorine-free environmental protection type) |
|
13 |
working hours |
1-99 hours or continuously |
|
14 |
power |
1480W |
|
15 |
working power supply |
AC220V 50Hz |
|
16 |
Studio size (mm) |
1245*505*1280 |
|
17 |
Overall size (mm) |
1345*675*1920 |
|
18 |
heating-up time |
0 ℃ to 40 ℃ ≤ 60 minutes |
|
19 |
cooling time |
40 ℃ to 10 ℃ ≤ 100 minutes |
|
20 |
compressor delay |
3minute |
|
21 |
the noise |
≦70db |
|
22 |
box material |
Polyurethane foam, good insulation effect, small temperature fluctuation, 304 stainless steel inner liner, 304 stainless steel appearance, corrosion resistance. |
|
23 |
LCD screen |
Multi-stage programming mode, can be set separately day and night mode temperature, time, cycle, etc. |
|
24 |
temperature control mode |
The air duct in the back of the box is used for circulating refrigeration, which enters from the bottom and exits from the top. The circulation is uniform, and the air volume is 2 m/s. |
|
25 |
灭菌 |
ultraviolet disinfection lamp |