PGX-1100


(A, B gear door with visible window, C, D gear solid door)

Comply with the world trend of environmental protection, international brand compressors and circulating fans, high efficiency, low energy consumption, not only promote energy saving, but also long service life, noise can be reduced to a lower limit, compared with traditional cryogenic equipment, cooling time saved more than 40%.

● Application overview:

Widely used in microbial tissue cell culture, seed germination, seedling test, plant cultivation and insect, small animal breeding, etc., can accurately simulate different environmental climate conditions.

● Product features:

The microcomputer program controls temperature and illumination, which can simulate temperature changes during the day and night, and can also select sufficient and stable light sources for growth environment.

Large LCD display, multi-group data display on one screen, menu operation interface, easy to understand, easy to observe and operate.

International brand compressor to ensure long-term continuous operation of test equipment, environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, promote energy saving.

Mirror stainless steel liner, four corners of the arc transition, partition bracket can be freely assembled and disassembled, easy to clean the work in the box.

30 sets of programs can be set, each set time range 1-99 hours (optional).

Independent temperature limit alarm system is provided, which will automatically interrupt if the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents. (Standard)

RS485 interface and computer can be equipped to connect, through the computer synchronous monitoring of experimental process or record experimental data. (Optional)

Optional: with CO2 inlet (to promote plant growth) and CO2 controller. (Imported infrared CO2 sensor)


Preface

projects

Technical parameters

1

product name

Intelligent light incubator

2

product model

The PGX-1100A-LED

The PGX-1100B-LED

3

volume

1100L

4

heating/cooling

Stainless steel electric heater/fully enclosed fluorine-free compressor

5

temperature control range

0 ℃-65 ℃ without light; 5 ℃-65 ℃ with light

6

temperature resolution

0.1 °C

7

temperature fluctuation

± 0.5 ℃ (heating operation) ± 1 ℃ (cooling operation)

8

illuminance

A = 5000 lux B = 15000 lux C = 25000 lux D = 30000 lux

9

illumination mode

LED special lamp for plant growth, side light source·0-100% stepless adjustable

10

working environment

20±5℃

11

Number of layers of grid

4

12

refrigerant

R134a (fluorine-free environmental protection type)

13

working hours

1-99 hours or continuously

14

power

1650W

15

working power supply

AC220V 50Hz

16

Studio size (mm)

1245*675*1280

17

Overall size (mm)

1345*795*1920

18

heating-up time

0 ℃ to 40 ℃ ≤ 60 minutes

19

cooling time

40 ℃ to 10 ℃ ≤ 100 minutes

20

compressor delay

3minute

21

the noise

≦70db

22

box material

Polyurethane foam, good insulation effect, small temperature fluctuation, 304 stainless steel inner liner, 304 stainless steel appearance, corrosion resistance.

23

LCD screen

Multi-stage programming mode, can be set separately day and night mode temperature, lighting, time, cycle, etc.

24

temperature control mode

The air duct in the back of the box is used for circulating refrigeration, which enters from the bottom and exits from the top. The circulation is uniform, and the air volume is 2 m/s.

25

Light Source Material

Imported chip, service life of 50000h. LED lamp waterproof and anti-corrosion, made of aluminum base strip, good heat dissipation effect

26

air circulation system

Micro-computer program automatic control, regular quantitative circulation, by the air supply system and exhaust system composed of a set of independent air treatment system