● Humanized design
Adopt Kesheng core control system, core parts are well-known brands.
Brand new fluorine-free design, green environmental protection makes you always walk in the forefront of healthy life.
Humanized touch buttons, menu operation, intuitive, multiple parameters can be displayed on the same screen.
Mirror stainless steel liner, four corners of the semi-arc transition, no tools can be removed from the box partition or lamp board, easy to disinfect and clean the studio.
Large LCD display, multi-group data display on one screen, menu operation interface, easy to understand, easy to observe and operate.
30 sets of programs can be set, each set time range 1-99 hours 59 minutes (optional).
Optional: with CO2 inlet (to promote plant growth) and CO2 controller. (Imported infrared CO2 sensor)
● What are the advantages of LED light source?
No thermal interference: LED beams do not generate heat and extract useful light that is conducive to plant growth.
Energy saving and environmental protection: LED light source energy consumption is extremely low, about 80% lower than ordinary light source, so the power consumption is extremely low.
Small size: LED light source has the characteristics of miniaturization, planarization, strong designability, etc.
Stable, long life: provide accurate, stable light, service life of up to 50,000 hours or more, high photoelectric conversion efficiency.
Fast response speed: optional overhead plane lighting, to ensure that the culture can fully absorb the light evenly, to maintain the consistency of experimental results.
● Intelligent control technology
It can simulate the temperature change of nature day and night, and can also simulate nature multi-directional light source.
User-set parameters can be automatically stored in case of power failure, and run the original setting program after power-on
Automatic control of circulating wind speed can avoid blowing down plant seedlings due to too fast circulating wind speed during the test
LED light sources suitable for plant growth are equipped, and the spectral structure is consistent with existing literature data.
● Intelligent multi-stage programmable control
The program controls temperature, humidity, illumination and time, simplifies the complex test process, and truly realizes automatic control and operation.
● Safety function
Independent temperature limit alarm system is provided, which will automatically interrupt if the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents.
When a fault occurs, the LCD screen appears fault information, and the operation fault is clear at a glance.
High or low temperature alarm.
● Data control system (optional)
RS485 or USB interface and software, through the computer synchronous monitoring of experimental process or record experimental data.
Realize data recording, data communication, graphic dynamic display, fault analysis.
Optional printer system for data recording, in line with GMP standards.
|
Preface |
projects |
Technical parameters |
|
1 |
product name |
LED plant growth lighting box |
|
2 |
product model |
The ZRX-1100A-LED ZRX-1100B-LEDZRX-1100D-LED |
|
3 |
volume |
1100L |
|
4 |
heating/cooling |
Stainless steel electric heater/fully enclosed fluorine-free compressor |
|
5 |
temperature control range |
0 ℃-65 ℃ without light; 5 ℃-65 ℃ with light |
|
6 |
temperature resolution |
0.1 °C |
|
7 |
temperature fluctuation |
± 0.5 ℃ (heating operation) ± 1 ℃ (cooling operation) |
|
8 |
illuminance |
A = 5000 lux B = 15000 lux C = 25000 lux D = 30000 lux Egear：40000LUX Fgear50000LUX （customizable200000LUX） |
|
9 |
illumination mode |
Ceiling light source·Stepless adjustable·Input the desired illumination value |
|
10 |
working environment |
20±5℃ |
|
11 |
Number of layers of light source board |
3 |
|
12 |
refrigerant |
R134a (fluorine-free environmental protection type) |
|
13 |
working hours |
1-99 hours or continuously |
|
14 |
power |
1450W |
|
15 |
working power supply |
AC220V 50Hz |
|
16 |
Studio size (mm) |
1245*675*1280 |
|
17 |
Overall size (mm) |
1345*795*1920 |
|
18 |
heating-up time |
0 ℃ to 40 ℃ ≤ 60 minutes |
|
19 |
cooling time |
40 ℃ to 10 ℃ ≤ 100 minutes |
|
20 |
compressor delay |
3minute |
|
21 |
the noise |
≦70db |
|
22 |
box material |
Polyurethane foam, good insulation effect, small temperature fluctuation, 304 stainless steel inner liner, 304 stainless steel appearance, corrosion resistance. |
|
23 |
LCD screen |
Multi-stage programming mode, can be set separately day and night mode temperature, lighting, time, cycle, etc. |
|
24 |
temperature control mode |
The air duct in the back of the box is used for circulating refrigeration, which enters from the bottom and exits from the top. The circulation is uniform, and the air volume is 2 m/s. |
|
25 |
Light Source Material |
Imported chip, service life of 50000h. LED light source board waterproof and anti-corrosion, made of aluminum substrate, good heat dissipation effect |
|
26 |
air circulation system |
Micro-computer program automatic control, regular quantitative circulation, by the air supply system and exhaust system composed of a set of independent air treatment system |