● Microcomputer automatic control, touch switch, simple operation;
● Large screen LCD display, simple and clear;
● Programmable working mode, the time, temperature and care required for each section can be set separately;
● Unique multi-temperature zone design, the number of temperature zones, illumination, humidity, time, etc. in each space can be independently set and controlled;
● Polyurethane foam door, each section has an independent door can be opened and closed, reduce mutual influence;
●PID output control heating system;
● Power-down memory function;
● Intelligent constant temperature control system, fast response, high temperature control accuracy;
● The working state of each temperature zone can be set separately, can be operated at the same time, or one or two of them can work, so as to save energy; when there is an obstacle in the operation of one temperature zone, the temperature zone can be closed without hindering other experiments;
● The compressor delay protection time of each temperature range can be set separately;
● It has ultra-temperature and sensor abnormal protection function to ensure the safety of instruments and samples;
● Suitable for plant seed germination, cultivation, seedling, insects, small animal breeding, wood, building materials performance test, etc.;
|
Preface |
projects |
Technical parameters |
|
1 |
product name |
intelligent multi-temperature-zone illumination incubator |
|
2 |
product model |
ZGX-1500D-L6 |
|
3 |
volume |
230 L * 6 (from 1996) |
|
4 |
heating/cooling |
Stainless steel electric heater/fully enclosed fluorine-free compressor |
|
5 |
temperature control range |
0℃-65℃ |
|
6 |
temperature resolution |
0.1 °C |
|
7 |
temperature fluctuation |
± 0.5 ℃ (heating operation) ± 1 ℃ (cooling operation) |
|
8 |
illuminance |
30000LUX |
|
9 |
illumination mode |
Ceiling light source·Stepless adjustable·Input the desired illumination value |
|
10 |
working environment |
20±5℃ |
|
11 |
Number of layers of light source board |
1 floor, 1 block for each independent space |
|
12 |
refrigerant |
R134a (fluorine-free environmental protection type) |
|
13 |
working hours |
1-99 hours or continuously |
|
14 |
power |
5320W |
|
15 |
working power supply |
AC220V 50Hz |
|
16 |
Studio size (mm) |
530*620*620 |
|
17 |
Overall size (mm) |
1800*795*1920 |
|
18 |
heating-up time |
0 ℃ to 40 ℃ ≤ 60 minutes |
|
19 |
cooling time |
40 ℃ to 10 ℃ ≤ 100 minutes |
|
20 |
compressor delay |
3minute |
|
21 |
the noise |
≦70db |
|
22 |
box material |
Polyurethane foam, good insulation effect, small temperature fluctuation, 304 stainless steel inner liner, 304 stainless steel appearance, corrosion resistance. |
|
23 |
LCD screen |
Multi-stage programming mode, can be set separately day and night mode temperature, lighting, time, cycle, etc. |
|
24 |
temperature control mode |
The air duct in the back of the box is used for circulating refrigeration, which enters from the bottom and exits from the top. The circulation is uniform, and the air volume is 2 m/s. |
|
25 |
control system |
Controller and refrigeration are all independent controllers |
|
26 |
air circulation system |
Micro-computer program automatic control, regular quantitative circulation, by the air supply system and exhaust system composed of a set of independent air treatment system |
|
Note: Multi-temperature zone light incubator, can customize different size double temperature zone light incubator, three temperature zone light incubator, four temperature zone light incubator, six temperature zone light incubator, eight temperature zone light incubator, can also configure humidifier or automatic water supply function according to requirements. |
||