Walk-in artificial climate box is a high-precision cold and hot constant temperature equipment with lighting, temperature control, CO2 control and humidity control functions, providing an ideal artificial climate experimental environment for users. It can be used for plant germination, seedling, tissue, microbial culture; insect and small animal breeding; water analysis of BOD determination and other uses of artificial climate test. It is an ideal test equipment for biological genetic engineering, medicine, agriculture, forestry, environmental science, animal husbandry, aquatic products and other production and scientific research departments.
Product Features:
This product is suitable for plant growth and tissue culture, seed germination, seedling, microbial culture test; insect small animal breeding; BOD determination of water quality monitoring; aging and service life test of medicinal materials, wood, building materials, etc., as well as special test equipment for light, constant temperature and humidity for other purposes. Features: High precision cold and hot constant temperature equipment with lighting, temperature control, CO2 control and humidification functions. Advanced microcomputer programmable temperature control technology, can set a variety of parameters (including temperature, humidity, illumination,CO2) to simulate the natural climate. Multiple mode control adjustable, easy to operate.
Product Features:
● Frost-free: completely avoid the domestic products without defrosting function caused by temperature and humidity drift and imported products in the defrosting process caused by large fluctuations in temperature and humidity inconvenience to users.
● Refrigeration technology with hot gas bypass, three-stage adjustable circulating fan speed, in line with the characteristics of European and American products. Can run continuously for a long time, temperature and humidity do not drift.
● The lighting devices placed inside the door and on the top of the box and the partition lamp bracket conform to the characteristics of European and American products. The illumination can be adjusted, and the temperature and illumination can simulate the all-weather natural law.
● Equipped with 10 inch touch screen, intelligent programmable controller using microcomputer fuzzy PID control technology, with 30 program settings can be recycled. Can set the appointment time, temperature and humidity and light level, with visual alarm signs and sound alarm function. Ultrasonic humidification mode is adopted in the box.
● Imported sensirion humidity sensor, sensirion temperature sensor, German imported EBM condenser fan, Taikang imported brand compressor, polyurethane material at the bottom.
● In the process of closing the door of the box, there is no vibration in the box, and the small test sample in the box will not be knocked down. Interior configuration 304 stainless steel liner
● Sheet metal processing adopts German imported CNC machine tools and laser processing technology combined with mold. Outer case is powder coated
|
Preface |
|
Technical parameters |
|
1 |
product name |
Walk-in climate chamber |
|
2 |
product model |
KS-9J-QHS |
|
3 |
|
0-40 Square |
|
4 |
heating/cooling |
Stainless steel electric heater/fully enclosed compressor |
|
5 |
temperature control range |
0℃-55℃ without light; 0℃-55℃ with light |
|
6 |
temperature control accuracy |
0.1 °C |
|
7 |
temperature fluctuation |
± 0.5 ℃ (heating operation) ± 1 ℃ (cooling operation) |
|
8 |
humidity control range |
40-95%RH Humidity control fluctuation: ±3%RH |
|
9 |
humidity control accuracy |
1%, uniformity ≤3% |
|
10 |
Humidification mode |
External ultrasonic humidifier |
|
11 |
|
|
|
12 |
light source is configured |
Three-layer plant LED cold light source, electrodeless adjustable, LED light panel can be customized, all colors of LED evenly distributed on the light panel, rejecting the light bar assembly mode. LED lamp beads 800 and above, good degree of maximization to improve the uniformity of light under the light plate |
|
13 |
light source component |
LED plant growth lamp, light source board adopts: color temperature 5300K+ plant red LED lamp beads, combination with spectrum |
|
14 |
illumination mode |
Ceiling light source·Stepless adjustable |
|
15 |
working environment |
|
|
16 |
Number of layers of light source board |
3 |
|
17 |
|
R22 |
|
18 |
working hours |
1-99 hours or continuously |
|
19 |
|
950W |
|
20 |
working power supply |
AC380V at 50Hz |
|
21 |
Studio size (mm) |
1750*1600*1800 |
|
22 |
Overall size (mm) |
2460*1830*2200 |
|
23 |
heating-up time |
0 ℃ to 40 ℃ ≤ 60 minutes |
|
23 |
cooling time |
40 ℃ to 10 ℃ ≤ 100 minutes |
|
25 |
compressor delay |
|
|
26 |
|
|
|
27 |
box material |
Polyurethane foam, good insulation effect, small temperature fluctuation, 304 stainless steel inner liner, 304 stainless steel appearance, corrosion resistance. |
|
28 |
|
Multi-stage programming mode, can be set separately day and night mode temperature, lighting, time, cycle, etc. |
|
29 |
temperature control mode |
The air duct in the back of the box is used for circulating refrigeration, which enters from the bottom and exits from the top. The circulation is uniform, and the air volume is 2m/s. |
|
30 |
Light Source Material |
Imported chip, service life of 50000h. LED light source board waterproof and anti-corrosion, made of aluminum substrate, good heat dissipation effect |
|
31 |
air circulation system |
Micro-computer program automatic control, regular quantitative circulation, by the air supply system and exhaust system composed of a set of independent air treatment system |
|
32 |
refrigeration unit |
Compressors and air coolers are required to be imported with original packaging and can reach-40 ℃ for normal operation. |
|
33 |
|
At least 3 layers of culture frame are available, height can be adjusted, aluminum alloy is not rusty, and each layer bears 200 kg. |
|
34 |
safety protection |
Including high temperature and low temperature protection, overload protection, compressor delay start protection, alarm record, power supply abnormality and other items |
|
35 |
Main power qualification |
The main power supply of the equipment shall have UL safety certification specification, and the product manufacturer shall pass ISO 9001 quality management system certification. (Third-party safety certification data must be provided during bidding for review to ensure equipment safety requirements |
|
36 |
|
Adjustable automatic CO2balance (or other required gas) and fresh air system, adjustable balance capacity 24 – 34 m3/h, adjustable balance temperature difference variation ≤ 0.5 ℃, adjustable balance energy consumption ≤ 40%, adjustable balance with internal and external air purification function to avoid cross pollution, adjustable balance device with IPX 4 waterproof level to ensure safety, air inlet PM2.5 filter screen to avoid external spores entering the cultivation room |
|
37 |
Automatic control system can be remote mobile phone detection and control |
(1)The user interface has the function lock function such as password, and the operation authority is managed hierarchically. All functional modules of the system are concentrated on a cloud platform, including web and mobile WeChat. (2)Remote control functions such as equipment operation status supervision, data viewing, temperature and humidity regulation, ventilation circulation, etc. can be realized remotely, and remote shutdown can be realized in emergency to realize unattended management. (3)Data supervision: 30 × 24 hours continuous data recording and storage can be realized, historical data temperature and humidity data can be viewed by day, week and month, and different room data can be displayed on the same coordinate axis. (4)Remote alarm: with over-temperature alarm, abnormal alarm function, can set temperature, humidity alarm upper and lower limits, data abnormal, sudden power failure can automatically send out alarm signals |
● Note: All control components are Schneider.